Caution / Notice / Hint

WARNING: This page is about a different car, the 2025 Lexus RX 350, 2024 Lexus RX 350, and 2023 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

COMPONENTS (INSTALLATION)

Fig 1: Oil Cooler Installation Components With Torque Specifications (1 Of 3)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
1	TRANSMISSION OIL COOLER	33493A	See step 1	-	-
2	OUTLET NO. 1 OIL COOLER HOSE	32942	See step 2	-	-
3	INLET NO. 1 OIL COOLER HOSE	32941	See step 3	-	-
4	WATER BY-PASS HOSE ASSEMBLY	16260	See step 4	-	-
5	NO. 1 AUTOMATIC TRANSMISSION OIL COOLER TUBE CLAMP	32923B	-	-	-
6	ENGINE WIRE	82121	-	-	-

N.m (kgf/cm, ft.lbf): Specified torque

Fig 2: Oil Cooler Installation Components (2 Of 3)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Procedure		Part Name Code
7	AIR CLEANER ASSEMBLY	17700	See step 7	-	-
8	INLET AIR CLEANER ASSEMBLY	17750A	See step 8	-	-
9	COOL AIR INTAKE DUCT SEAL	53295E	-	-	-
10	ADD ENGINE COOLANT	-	-	See step 10	-
11	ADJUST AUTOMATIC TRANSAXLE FLUID	-	-	-	See step 11
12	INSPECT FOR ENGINE COOLANT LEAK	-	-	-	See step 12
13	INSPECT FOR AUTOMATIC TRANSAXLE FLUID LEAK	-	-	-	See step 13

Fig 3: Oil Cooler Installation Components With Torque Specifications (3 Of 3)

Callout - Procedure		Part Name Code
14	FRONT FENDER APRON SEAL LH	53737B	-	-	-
15	NO. 2 ENGINE UNDER COVER ASSEMBLY	51420	-	-	-
16	NO. 1 ENGINE UNDER COVER	51441	-	-	-
17	FRONT WHEEL OPENING EXTENSION PAD LH	53852B	-	-	-
18	FRONT WHEEL OPENING EXTENSION PAD RH	53851D	-	-	-

N.m (kgf/cm, ft.lbf): Specified torque