Removal [08/2023 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
- for HEV Model:
  Refer to REMOVAL [10/2022 - 10/2024] , or refer to REMOVAL [10/2024 - ]
- for PHEV Model:
  Refer to REMOVAL [08/2023 - ]
REMOVE CRANKSHAFT PULLEY ASSEMBLY

Refer to PROCEDURE - Step 23

REMOVE TIMING CHAIN COVER OIL SEAL

GTY1075420

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using a screwdriver with its tip wrapped with protective tape, pry out the timing chain cover oil seal.
NOTE:
After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.