Installation [08/2023 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL TIMING CHAIN COVER OIL SEAL

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

0 to 2 mm

Apply MP grease to the lip of a new timing chain cover oil seal.
NOTE:
- Keep the lip free from foreign matter.
- Do not allow MP grease to contact the dust seal.
Using SST and a hammer, tap in the timing chain cover oil seal.
- SST: 09223-00010
Standard Depth

0 to 2 mm (0 to 0.0787 in.) (From the edge of the No. 2 timing chain cover assembly.)

NOTE:
Do not tap in the timing chain cover oil seal at an angle.

INSTALL CRANKSHAFT PULLEY ASSEMBLY

Refer to PROCEDURE - Step 52
INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
- for HEV Model:
  Refer to INSTALLATION [10/2022 - 10/2024] , or refer to INSTALLATION [10/2024 - ]
- for PHEV Model:
  Refer to INSTALLATION [08/2023 - ]