LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Emission Control System - Service Information) >> Vacuum Sensor >> Removal [10/2022 - ] >> Procedure

Removal [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT VACUUM HOSE 
    1. GTY1131961Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE E.F.I. VACUUM SENSOR ASSEMBLY (MANIFOLD ABSOLUTE PRESSURE SENSOR) 
    1. GTY1131608Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) connector.
      2. Using an 8 mm socket wrench, remove the bolt and E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) from the intake manifold.
scientia non olet · About LEMON Manuals