LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Emission Control System - Service Information) >> FUEL VAPOR CONTAINMENT VALVE (for HEV Model) >> Inspection [10/2022 - ] >> Procedure

Inspection [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FUEL VAPOR CONTAINMENT VALVE (CLOSE TANK WITH BOLT VALVE ASSEMBLY) 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition Result
      1 (+UL) - 2 (+UM) 20°C (68°F) 29 to 33 Ω Ω
      3 (+UN) - 4 (+UP) 20°C (68°F) 29 to 33 Ω Ω
      GTY930628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Fuel Vapor Containment Valve (Close Tank with Bolt Valve Assembly))

      If the result is not as specified, replace the fuel vapor containment valve (close tank with bolt valve assembly).