LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Emission Control System - Service Information) >> EGR Valve >> Inspection [10/2022 - ] >> Procedure

Inspection [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT EGR VALVE ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY745887Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (EGR Valve Assembly)

      Standard Resistance

      Tester Connection Condition Specified Condition Result
      1 (EGA+) - 2 (EGA-) 20°C (68°F) 3.1 to 3.7 Ω Ω
      3 (EGB-) - 4 (EGB+) 20°C (68°F) 3.1 to 3.7 Ω Ω

      If the result is not as specified, replace the EGR valve assembly.