LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Engine Control System - Diagnostic Codes (P0087-P0110)) >> SFI System >> DTC P0110-2A: Intake Air Temperature Sensor 1 Bank 1 Signal Stuck in Range [10/2022 - 10/2024] >> Procedure

DTC P0110-2A: Intake Air Temperature Sensor 1 Bank 1 Signal Stuck in Range [10/2022 - 10/2024]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0110-2A) 
    1. Read the DTCs.

      Powertrain > Engine > Trouble Codes 

      Result

      Result Proceed to
      P0110-2A and other DTCs are output A
      P0110-2A is output B

      HINT: 

      • If any DTCs other than P0110-2A are output, troubleshoot those DTCs first.
      • Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

        Refer to INITIALIZATION [10/2022 - ]

    Result: 

    GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2022 - 08/2023] 

    Result: 

    REPLACE MASS AIR FLOW METER SUB-ASSEMBLY. Refer to  REMOVAL [10/2022 - ]