Installation [10/2022 - ]: Procedure
WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL FUEL MAIN VALVE ASSEMBLY
*1 O-ring - - *a Mesh *b Mini-clip *c No Clearance - - - Apply gasoline to a new O-ring. Then install the O-ring to the fuel main valve assembly.NOTE:
Make sure that there is no clearance between the fuel main valve assembly and mesh.
- Install the fuel main valve assembly to the fuel suction tube with pump and gauge assembly.NOTE:
Make sure that the O-ring is not cut or pinched during installation.
- Apply gasoline to a new O-ring. Then install the O-ring to the fuel main valve assembly.
- INSTALL FUEL PRESSURE REGULATOR HOLDER
- INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
Refer to INSTALLATION [10/2022 - ]