Removal [08/2023 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT FENDER APRON SEAL RH
for HEV Model:

Refer to PROCEDURE - Step 12 [10/2022 - 10/2024] , or refer to PROCEDURE - Step 12 [10/2024 - ]

for PHEV Model:

Refer to PROCEDURE - Step 12

REMOVE OIL PRESSURE CONTROL VALVE ASSEMBLY

Disconnect the oil pressure control valve assembly connector.
Using an 8 mm socket wrench, remove the bolt and oil pressure control valve assembly from the timing chain cover assembly.