LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Lubrication System - Service Information) >> Oil Pressure And Temperature Sensor >> Removal [08/2023 - ] >> Procedure

Removal [08/2023 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY 

    See step  1

  2. REMOVE OIL PRESSURE AND TEMPERATURE SENSOR 
    1. GTY1075049Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the oil pressure and temperature sensor connector.
      2. Using a 24 mm deep socket wrench, remove the oil pressure and temperature sensor.
        NOTE:

        If the oil pressure and temperature sensor is dropped or subjected to a strong impact, replace it with a new one.

scientia non olet · About LEMON Manuals