LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Control System - Diagnostic Codes (P0171-P0195)) >> SFI System >> DTC P0190-2A: Fuel Rail Pressure Sensor "A" Signal Stuck in Range; DTC P0190-64: Fuel Rail Pressure Sensor "A" Signal Plausibility Failure [08/2023 - ] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2025 Lexus RX 450h+, 2025 Lexus RX 350h, 2024 Lexus RX 450h+, 2024 Lexus RX 350h, and 2023 Lexus RX 350h. However, it is still accessible from the selected car via links, so may be relevant.

Fuel Pressure Sensor Stuck Monitor 

If the fuel pressure sensor (for high pressure side) value does not follow the change in the target high pressure side fuel pressure, it is judged as a malfunction. If this malfunction is detected in 2 consecutive driving cycles, the ECM will illuminate the MIL and store DTC P0190-2A.

Fuel Pressure Sensor Correlation Monitor with Barometric Pressure 

If the fuel pressure sensor (for high pressure side) value is less than or higher than the threshold value when a cold start is performed after the engine has been warmed up and then stopped, it is judged as a malfunction has occurred. If this malfunction is detected for 2 consecutive driving cycles, the ECM will illuminate the MIL and store DTC P0190-64.