DTC P0D56-11: Charging Connector Proximity Detection Circuit Short to Ground [08/2023 - ]: Description
WARNING: This page is about a different car, the 2025 Lexus RX 450h+ and 2024 Lexus RX 450h+. However, it is still accessible from the selected car via links, so may be relevant.
The charging cable (electric vehicle charger cable assembly) has a built-in micro switch that is operated by the latch release button, and the ON/OFF state of the switch is output to the electric vehicle charger assembly (charge control ECU assembly) as the PISW signal. Based on the PISW signal, the electric vehicle charger assembly (charge control ECU assembly) detects the connection state of the charging cable. The electric vehicle charger assembly (charge control ECU assembly) monitors the PISW signal and detects malfunctions.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|---|
| P0D56-11 | Charging Connector Proximity Detection Circuit Short to Ground | PISW terminal voltage remains less than 0.35 V for a certain period of time. (1 trip detection logic) |
|
Comes on | Master Warning: Comes on |
Plug-in Control | A | SAE Code: P0D58 |