LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Plug-In Charge Control System - Diagnostic Codes (1 Of 3)) >> PLUG-IN CHARGE CONTROL SYSTEM (for PHEV Model) >> DTC P0D38-28: Hybrid/EV Battery Charger Input Current Sensor Circuit Signal Bias Level Out of Range / Zero Adjustment Failure [08/2023 - ] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2025 Lexus RX 450h+ and 2024 Lexus RX 450h+. However, it is still accessible from the selected car via links, so may be relevant.

The charge control ECU built into the electric vehicle charger assembly monitors the input alternating current using the IAC sensor. If it detects an IAC sensor malfunction, it illuminates the MIL and stores a DTC.