DTC P0795-7F: Pressure Control Solenoid "C" Actuator Stuck Off [10/2022 - ]: Procedure

1. Read the DTCs using the GTS.

   Powertrain > Transmission > Trouble Codes 

   HINT: 

   • If any DTCs other than P0745-7F, P0740-7E, P0775-7F, P0795-7F, P08BA-7F, P2713-7F, P2807-7F and P2816-7F are output, perform troubleshooting for those DTCs first.
   • If a solenoid valve is stuck ON or OFF, DTCs for several solenoid valves including the malfunctioning solenoid valve will be stored.

   Result

   Result	Proceed to
   DTC P0795-7F and DTC P0745-7F, P0740-7E, P0775-7F, P08BA-7F, P2713-7F, P2807-7F and/or P2816-7F are output	A
   Only DTC P0795-7F is output	B
   DTCs other than P0745-7F, P0740-7E, P0775-7F, P0795-7F, P08BA-7F, P2713-7F, P2807-7F and P2816-7F are also output	C

Result: 

B 

See step  4

Result: 

C 

GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2022 - 08/2023]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2023 - 10/2024]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2024 - ] 

Result: 

A 

See step  2

1. Clear the DTCs.

   Powertrain > Transmission > Clear DTCs 

   HINT: 

   Write down the currently output DTCs before clearing them.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

1. Perform the stall speed test.

   HINT: 

   Refer to MECHANICAL SYSTEM TESTS [10/2022 - ]

   Result

   Test Condition	Proceed to
   Stall speed test can be performed	A
   Stall speed test cannot be performed	B

Result: 

B 

See step  6

Result: 

A 

See step  4

Refer to INSPECTION [10/2022 - ]

Result

Result: 

NG 

REPLACE SOLENOID (SL1), (SL2), (SL3), (SL4), (SL5) OR (SL6) VALVE. Refer to  REMOVAL [10/2022 - ] 

Result: 

OK 

See step  5

Refer to INSPECTION [10/2022 - ]

Result

Result: 

NG 

REPLACE SOLENOID (SL) VALVE. Refer to  REMOVAL [10/2022 - ] 

Result: 

OK 

See step  6

Refer to INSPECTION [10/2022 - ]

Result

Result: 

NG 

REPLACE SOLENOID (SLT) VALVE. Refer to  REMOVAL [10/2022 - ] 

Result: 

OK 

See step  7

1. Inspect the transmission valve body assembly.

   HINT: 

   Refer to REMOVAL [10/2022 - ]

   OK

   There is no foreign matter on each valve and they operate smoothly.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

REPAIR OR REPLACE TRANSMISSION VALVE BODY ASSEMBLY. Refer to  REMOVAL [10/2022 - ] 

Result: 

OK 

See step  8

1. Inspect the torque converter assembly.

   Refer to INSPECTION [10/2022 - ]

   OK

   The torque converter assembly is normal.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

REPAIR OR REPLACE TORQUE CONVERTER ASSEMBLY. Refer to  REMOVAL [10/2022 - ] 

Result: 

OK 

See step  9

HINT: 

Refer to REMOVAL [10/2022 - ]

Result

Result: 

NEXT 

PERFORM REGISTRATION. Refer to  REGISTRATION [10/2022 - ]