LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Electronic A/T Shift Lever System - Diagnostic Codes (1 Of 2)) >> Electronic Shift Lever System >> DTC P085D-94: Gear Shift Control Module "A" Unexpected Operation [10/2022 - ] >> Procedure

DTC P085D-94: Gear Shift Control Module "A" Unexpected Operation [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 350, 2024 Lexus RX 350, and 2023 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC OUTPUT (TRANSMISSION) 

    Pre-procedure1

    • Turn the ignition switch to ON.
    • Check for DTCs.

      Powertrain > Transmission > Trouble Codes 

      Result

      Result Proceed to
      Only P085D-94 is output A
      P085D-94 and other DTCs are output B

    Post-procedure1

    • Turn the ignition switch off.

    Result: 

    REPLACE TRANSMISSION FLOOR SHIFT ASSEMBLY (SHIFT CONTROL ECU). Refer to  REMOVAL [10/2022 - ] 

    Result: 

    GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2022 - 08/2023]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2023 - ]