LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Engine Control System - Diagnostic Codes (07 Of 10)) >> SFI SYSTEM (for Gasoline Model) >> DTC P0606-94: Control Module Processor Unexpected Operation [10/2022 - ] >> Description

DTC P0606-94: Control Module Processor Unexpected Operation [10/2022 - ]: Description

WARNING: This page is about a different car, the 2025 Lexus RX 350, 2024 Lexus RX 350, and 2023 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

The ECM calculates and compares the accelerator pedal opening angle value used for control and the value used for monitoring.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL DTC Output from Priority Note
P0606-94 Control Module Processor Unexpected Operation Condition where output of the accelerator opening angle value used for control is more excessive than that of the accelerator opening angle value used for monitoring is continuously detected for 0.2 seconds or more (1 trip detection logic).
  • Accelerator pedal (with sensor) rod assembly
  • Wire harness or connector
  • ECM
Comes on Engine A
  • SAE Code: P0606
  • DTC for Mexico Models: Applies