DTC P0606-09: Control Module Processor (Brake Override System Output Signal) Component Failure [10/2024 - ]: Procedure

1. Perform a confirmation drive. (Refer to confirmation drive in function description)
2. Read the DTCs.

   Powertrain > Engine > Trouble Codes 

   Result

   Result	Proceed to
   P0606-09 and other DTCs are output	A
   P0606-09 is output	B

   HINT: 

   If a DTC other than DTC P0606-09 is output, troubleshoot that DTC first.

Result: 

B 

REPLACE ECM. Refer to  REMOVAL [10/2022 - ] 

Result: 

A 

See step  2

HINT: 

After the inspection, Perform the following procedure.

Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2024 - ]

Result

Result: 

NEXT 

See step  3

Pre-procedure1

• None.

• Clear the DTCs.

  Powertrain > Engine > Clear DTCs 

  Result

  Proceed to
  NEXT

Post-procedure1

• Turn the ignition switch off and wait for at least 30 seconds.

Result: 

NEXT 

See step  4

Pre-procedure1

• Perform a confirmation drive. (Refer to confirmation drive in function description)

• Read the DTCs.

  Powertrain > Engine > Trouble Codes 

  Result

  Result	Proceed to
  DTCs are not output	A
  P0606-09 is output	B

Post-procedure1

• None.

Result: 

A 

END 

Result: 

B 

REPLACE ECM. Refer to  REMOVAL [10/2022 - ]