LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Stop And Start System - Diagnostic Codes) >> Stop And Start System >> DTC U0100-87: Lost Communication With ECM/PCM "A" Missing Message; DTC U0103-87: Lost Communication with Gear Shift Control Module "A" Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0129-87: Lost Communication With Brake System Control Module Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0151-87: Lost Communication with Restraints Control Module Missing Message; DTC U0155-87: Lost Communication with Instrument Panel Cluster (IPC) Control Module; DTC U0164-87: Lost Communication with HVAC Control Module Missing Message; DTC U115C-87: Lost Communication with ECM/PCM "A" (ch5) Missing Message; DTC U1170-87: Lost Communication With Brake System Control Module(ch2) Missing Message [10/2022 - ] >> Procedure

DTC U0100-87: Lost Communication With ECM/PCM "A" Missing Message; DTC U0103-87: Lost Communication with Gear Shift Control Module "A" Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0129-87: Lost Communication With Brake System Control Module Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0151-87: Lost Communication with Restraints Control Module Missing Message; DTC U0155-87: Lost Communication with Instrument Panel Cluster (IPC) Control Module; DTC U0164-87: Lost Communication with HVAC Control Module Missing Message; DTC U115C-87: Lost Communication with ECM/PCM "A" (ch5) Missing Message; DTC U1170-87: Lost Communication With Brake System Control Module(ch2) Missing Message [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 350, 2024 Lexus RX 350, and 2023 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CLEAR DTC 
    1. Clear the DTCs.

      Powertrain > Stop and Start > Clear DTCs 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  2

  2. CHECK DTC OUTPUT 

    Pre-procedure1

    • Turn the ignition switch off and wait for 30 seconds or more.
    • Start the engine.
    • Perform a road test.
    • Read the DTCs.

      Powertrain > Stop and Start > Trouble Codes 

      Result

      Result Proceed to
      U0100-87, U0103-87, U0129-87, U0140-87, U0151-87, U0155-87, U115C-87, U0164-87 or U1170-87 is output A
      U0100-87, U0103-87, U0129-87, U0140-87, U0151-87, U0155-87, U115C-87, U0164-87 or U1170-87 is not output B

    Post-procedure1

    • None.

    Result: 

    GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2022 - 08/2023]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2023 - ] 

    Result: 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2022 - ]