How To Proceed With Troubleshooting [10/2022 - ]: Procedure

Result

Result: 

NEXT 

See step  2

Result

Result: 

NEXT 

See step  3

Standard Voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result

Result: 

NEXT 

See step  4

Result

Result: 

NEXT 

See step  5

1. Refer to DTC Check / Clear.

   Refer to DTC CHECK / CLEAR [10/2022 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  6

Result

Result: 

NEXT 

See step  7

1. Refer to Check Mode Procedure.

   Refer to CHECK MODE PROCEDURE [10/2022 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  8

1. Refer to Road Test.

   Refer to ROAD TEST [10/2022 - ] 

   Result

   Result	Proceed to
   Symptom does not occur	A
   Symptom occurs	B

Result: 

B 

See step  10

Result: 

A 

See step  9

1. Refer to Symptom Simulation.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2022 - ]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  10

1. Refer to DTC Check / Clear.

   Refer to DTC CHECK / CLEAR [10/2022 - ] 

   Result

   Result	Proceed to
   DTCs are not output	A
   DTCs are output	B

Result: 

B 

See step  19

Result: 

A 

See step  11

1. Refer to Mechanical System Tests.

   Refer to MECHANICAL SYSTEM TESTS [10/2022 - ] 

   Result

   Proceed to
   OK
   NG

Result: 

NG 

See step  16

Result: 

OK 

See step  12

1. Refer to Hydraulic Test.

   Refer to HYDRAULIC TEST [10/2022 - ] 

   Result

   Proceed to
   OK
   NG

Result: 

NG 

See step  16

Result: 

OK 

See step  13

1. Refer to Manual Shifting Test.

   Refer to MANUAL SHIFTING TEST [10/2022 - ] 

   Result

   Proceed to
   OK
   NG

Result: 

NG 

See step  15

Result: 

OK 

See step  14

1. Refer to Problem Symptoms Table.

   Refer to PROBLEM SYMPTOMS TABLE [10/2022 - ] 

   Result

   Proceed to
   OK
   NG

Result: 

NG 

See step  20

Result: 

OK 

See step  15

1. Refer to Problem Symptoms Table.

   Refer to PROBLEM SYMPTOMS TABLE [10/2022 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  16

Result

Result: 

NEXT 

See step  17

Result

Result: 

NEXT 

See step  18

Result

Result: 

NEXT 

END 

1. Refer to Diagnostic Trouble Code Chart.

   Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2022 - 08/2023] , or refer to DIAGNOSTIC TROUBLE CODE CHART [08/2023 - 10/2024] , or refer to DIAGNOSTIC TROUBLE CODE CHART [10/2024 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  20

Result

Result: 

NEXT 

See step  21

Result

Result: 

NEXT 

See step  17