LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Control System - Diagnostic Codes (10 Of 10), Symptom Tests (1 Of 2) & Circuit Tests (1 Of 2)) >> SFI SYSTEM (for Gasoline Model) >> DTC U1103-87: Lost Communication with Stop and Start Control Module Missing Message [10/2022 - ] >> Procedure

DTC U1103-87: Lost Communication with Stop and Start Control Module Missing Message [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus RX 350, 2024 Lexus RX 350, and 2023 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC OUTPUT (U1103-87) 

    Pre-procedure1

    • Perform the Health Check using the GTS.
    • Read the DTCs.

      Result

      Result Proceed to
      U1103-87 and other DTCs are output A
      U1103-87 is output B

      HINT: 

      If any DTCs other than U1103-87 are output, troubleshoot those DTCs first.

    Post-procedure1

    • None.

    Result: 

    GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2022 - 08/2023]  , or Refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2023 - 10/2024]  , or Refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2024 - ] 

    Result: 

    GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2022 - 08/2023]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2023 - ]