Adjustment [10/2022 - ]: Procedure

See step  1

1. Horizontally and vertically adjust the hood.
   1. Loosen the 4 hinge bolts of the hood.

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   2. Adjust the clearance between the hood and front fenders by moving the hood.
   3. Tighten the 4 hinge bolts after adjustment.

      Torque: 13 N.m (133 kgf/cm, 10 ft.lbf) 

2. Adjust the front end of the hood in the up/down direction.
   1. Using a 5.5 mm socket driver, rotate the bolt to adjust the height of the hood.

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Use the same procedure to adjust the opposite side.