LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 500h >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Ext) - Service Information >> Rear Light Assembly >> Installation [10/2022 - ] >> Procedure

Installation [10/2022 - ]: Procedure

  1. INSTALL REAR LIGHT ASSEMBLY 

    Nut 

    Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

    Bolt 

    Torque: 5.0 N.m (51 kgf/cm, 44 in.lbf) 

  2. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH 
  3. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH 
  4. CONNECT POWER BACK DOOR UNIT ASSEMBLY LH 
  5. CONNECT POWER BACK DOOR UNIT ASSEMBLY RH 
  6. INSTALL BACK DOOR TRIM BOARD ASSEMBLY 
  7. INSTALL NO. 2 LUGGAGE COMPARTMENT LIGHT ASSEMBLY 
  8. INSTALL BACK DOOR INSIDE HANDLE 
  9. INSTALL BACK DOOR LOCK COVER 
  10. INSTALL BACK DOOR SIDE GARNISH LH 
  11. INSTALL BACK DOOR SIDE GARNISH RH 
  12. INSTALL BACK DOOR TRIM UPPER COVER 
  13. INITIALIZE POWER BACK DOOR SYSTEM 

    Refer to INITIALIZATION [10/2022 - ]

  14. INSPECT POWER BACK DOOR SYSTEM 
    Refer to OPERATION CHECK [10/2022 - ]
scientia non olet · About LEMON Manuals