Removal [08/2023 - 10/2024]: Procedure

REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
for A25A-FXS HEV Model: Refer to REMOVAL [10/2022 - 10/2024]

for A25A-FXS PHEV Model: Refer to REMOVAL [08/2023 - ]

for T24A-FTS 1Motor-HEV Model: Refer to REMOVAL [10/2022 - ]

for T24A-FTS Gasoline Model: Refer to REMOVAL [10/2022 - ]
REMOVE FUEL DELIVERY GUARD (except T24A-FTS)
for HEV Model: Refer to PROCEDURE - Step 43

for PHEV Model: Refer to PROCEDURE - Step 44
REMOVE ENGINE MOUNTING BRACKET CAP (for T24A-FTS Gasoline Model)

Refer to PROCEDURE - Step 54
REMOVE FUEL DELIVERY GUARD (for T24A-FTS 1Motor-HEV Model)
Refer to PROCEDURE - Step 44

INSTALL ENGINE HANGERS

for A25A-FXS HEV Model: Refer to PROCEDURE - Step 44
for A25A-FXS PHEV Model: Refer to PROCEDURE - Step 45
for T24A-FTS 1Motor-HEV Model: Refer to PROCEDURE - Step 45
for T24A-FTS Gasoline Model: Refer to PROCEDURE - Step 55

REMOVE FRONT FRAME ASSEMBLY

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY
Refer to PROCEDURE - Step 16
REMOVE RACK AND PINION POWER STEERING GEAR ASSEMBLY

Refer to PROCEDURE - Step 17

REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

NOTE:

Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH
1. Perform the same procedure as for the LH side.
REMOVE FRONT LOWER ARM BUSHING STOPPER (for LH Side)
Refer to PROCEDURE - Step 11
REMOVE FRONT LOWER ARM BUSHING STOPPER (for RH Side)
1. Perform the same procedure as for the LH side.

REMOVE NO. 2 EXHAUST PIPE SUPPORT BRACKET

REMOVE TRANSMISSION OIL COOLER BRACKET (except T24A-FTS)