Installation [10/2022 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2025 Lexus RX 500h, 2025 Lexus RX 350, 2024 Lexus RX 500h, 2024 Lexus RX 350, and 2023 Lexus RX 500h. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL SPARK PLUG

Refer to PROCEDURE - Step 1

INSTALL IGNITION COIL ASSEMBLY

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using an 8 mm socket wrench, install the 4 ignition coil assemblies to the cylinder head cover sub-assembly with the 4 bolts.
Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)

NOTE:
If an ignition coil assembly has been struck or dropped, replace it.

CONNECT ENGINE WIRE

INSTALL NO. 3 ENGINE COVER

for 1Motor-HEV Model:
Refer to PROCEDURE - Step 55
for Gasoline Model:
Refer to PROCEDURE - Step 55

INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

for 1Motor-HEV Model:
Refer to PROCEDURE - Step 56
for Gasoline Model:
Refer to PROCEDURE - Step 56

PERFORM INITIALIZATION
1. Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.
  - for 1Motor-HEV Model:
    Refer to INITIALIZATION [10/2022 - ]
  - for Gasoline Model:
    Refer to INITIALIZATION [10/2022 - ]