Installation [10/2022 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2025 Lexus RX 500h, 2025 Lexus RX 350, 2024 Lexus RX 500h, 2024 Lexus RX 350, and 2023 Lexus RX 500h. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL OIL PUMP ASSEMBLY

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 24 N.m (245 kgf/cm, 18 ft.lbf)

INSTALL ENGINE BALANCER ASSEMBLY
- for 1Motor-HEV Model:
  Refer to PROCEDURE - Step 6
- for Gasoline Model:
  Refer to PROCEDURE - Step 6

INSTALL STIFFENING CRANKCASE ASSEMBLY

for 1Motor-HEV Model:
Refer to PROCEDURE - Step 7
for Gasoline Model:
Refer to PROCEDURE - Step 7

INSTALL ENGINE OIL LEVEL SENSOR

See step 1

INSTALL OIL STRAINER SUB-ASSEMBLY

for 1Motor-HEV Model:
Refer to PROCEDURE - Step 9
for Gasoline Model:
Refer to PROCEDURE - Step 9

INSTALL NO. 2 OIL PAN SUB-ASSEMBLY

for 1Motor-HEV Model:
Refer to PROCEDURE - Step 10
for Gasoline Model:
Refer to PROCEDURE - Step 10

INSTALL TIMING CHAIN COVER ASSEMBLY
- for 1Motor-HEV Model:
  Refer to INSTALLATION [10/2022 - ]
- for Gasoline Model:
  Refer to INSTALLATION [10/2022 - ]