LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 350h Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Engine Lubrication System - Service Information) >> Oil Pressure Switching Valve >> Removal [10/2022 - ] >> Procedure

Removal [10/2022 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2025 Lexus RX 500h, 2025 Lexus RX 350, 2024 Lexus RX 500h, 2024 Lexus RX 350, and 2023 Lexus RX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT FENDER APRON SEAL RH 

    for 1Motor-HEV Model:

    Refer to PROCEDURE - Step 12

    for Gasoline Model:

    Refer to PROCEDURE - Step 14

  2. DISCONNECT ENGINE WIRE 
    1. GTY1133077Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE OIL PRESSURE CONTROL VALVE ASSEMBLY 
    1. GTY1131872Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the oil pressure control valve assembly connector.
      2. Using an 8 mm socket wrench, remove the bolt and oil pressure control valve assembly from the timing chain cover assembly.
scientia non olet · About LEMON Manuals