Removal [10/2022 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2025 Lexus RX 500h, 2025 Lexus RX 350, 2024 Lexus RX 500h, 2024 Lexus RX 350, and 2023 Lexus RX 500h. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

DRAIN ENGINE OIL
Refer to PROCEDURE - Step 2

REMOVE NO. 2 OIL PAN SUB-ASSEMBLY

for 1Motor-HEV Model:
Refer to PROCEDURE - Step 58
for Gasoline Model:
Refer to PROCEDURE - Step 58

REMOVE ENGINE OIL LEVEL SENSOR

Disconnect the engine oil level sensor connector.
Remove the clip from the engine oil level sensor.
Using an 8 mm socket wrench, remove the 2 bolts and engine oil level sensor from engine balancer assembly.