Installation [10/2022 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2025 Lexus RX 500h, 2025 Lexus RX 350, 2024 Lexus RX 500h, 2024 Lexus RX 350, and 2023 Lexus RX 500h. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL OIL COOLER PIPE GASKET
INSTALL OIL COOLER GASKET
INSTALL OIL COOLER ASSEMBLY
1. Fig 1: Oil Cooler Assembly Tightening Sequence
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  1. Install the oil cooler assembly with the 4 bolts in several steps in the order shown in the illustration.
    Torque: 21 N.m (214 kgf/cm, 15 ft.lbf)
CONNECT WATER BY-PASS HOSE

INSTALL EXHAUST PIPE HEAT INSULATOR

Install the exhaust pipe heat insulator with the 2 bolts.
Torque: 21 N.m (214 kgf/cm, 15 ft.lbf)

NOTE:
Make sure that the exhaust pipe heat insulator do not contact the oil cooler assembly.

INSTALL CONVERTER WITH CATALYST ASSEMBLY
for 1Motor-HEV Model:

Refer to INSTALLATION [10/2022 - ]

for Gasoline Model:

Refer to INSTALLATION [10/2022 - ]