LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RX 350h Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Intake / Exhaust System - Service Information) >> INTERCOOLER (for Gasoline Model) >> Removal [10/2022 - ] >> Procedure

Removal [10/2022 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2025 Lexus RX 500h, 2025 Lexus RX 350, 2024 Lexus RX 500h, 2024 Lexus RX 350, and 2023 Lexus RX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. DRAIN ENGINE COOLANT 

    Refer to PROCEDURE - Step 4

  2. DRAIN COOLANT (for Intercooler) 

    Refer to PROCEDURE - Step 4

  3. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 26
  4. REMOVE NO. 3 ENGINE COVER 

    Refer to PROCEDURE - Step 27

  5. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY 
    1. GTY1130439Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE 

    See step  13

  7. DISCONNECT ENGINE WIRE 
    1. GTY1130393Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. DISCONNECT PURGE VALVE (NO. 1 VACUUM SWITCHING VALVE ASSEMBLY) 

    See step  10

  9. REMOVE AIR TUBE ASSEMBLY 
    1. GTY1130920Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using an 8 mm socket wrench, remove the 4 bolts and air tube assembly from the intercooler assembly.
      2. Remove the air tube gasket from the intercooler assembly.
  10. REMOVE FUEL DELIVERY GUARD 
    1. GTY1078948Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. DISCONNECT NO. 2 FUEL VAPOR FEED HOSE 
    1. GTY1078152Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. DISCONNECT NO. 1 TURBO WATER HOSE 
    1. GTY1078153Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. DISCONNECT NO. 1 INTERCOOLER COOLING WATER HOSE 
    1. GTY1078159Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. DISCONNECT NO. 3 WATER BY-PASS HOSE 
    1. GTY1078161Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. DISCONNECT NO. 5 WATER BY-PASS HOSE (Type A) 
    1. GTY1078157Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. DISCONNECT NO. 4 TURBO WATER HOSE 
    1. GTY1078158Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  17. DISCONNECT NO. 2 INTERCOOLER COOLING WATER HOSE 
    1. GTY1078162Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  18. DISCONNECT NO. 4 WATER BY-PASS HOSE 
    1. GTY1130442Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  19. DISCONNECT NO. 5 WATER BY-PASS HOSE (Type B) 
    1. GTY1130441Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE 
    Refer to PROCEDURE - Step 13
  21. REMOVE INTAKE MANIFOLD WITH INTERCOOLER ASSEMBLY 
    1. GTY1078171Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  22. REMOVE NO. 7 INTERCOOLER COOLING WATER HOSE 
    1. GTY1130440Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY1130445Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  23. REMOVE NO. 6 INTERCOOLER COOLING WATER HOSE 
    1. GTY1130444Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY1130443Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  24. REMOVE INTERCOOLER ASSEMBLY 
    1. GTY1078588Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 4 nuts and bolts to separate the intercooler assembly from the intake manifold and No. 2 air tube.
      2. Using an 8 mm socket wrench, remove the bolt and No. 2 turbo pressure sensor from the intercooler assembly.
      3. Remove the No. 2 air tube gasket from the intercooler assembly.
      4. Remove the No. 1 intake manifold to head gasket from the intake manifold.
scientia non olet · About LEMON Manuals