Removal [10/2022 - 08/2023]: Procedure
- REMOVE TAIL EXHAUST PIPE ASSEMBLY WARNING:
- To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.
- REMOVE AIR FUEL RATIO SENSOR (for Sensor 2)
Refer to REMOVAL [10/2022 - 08/2023]
- DRAIN ENGINE COOLANT (for Engine)
Refer to PROCEDURE - Step 4
- REMOVE FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst) WARNING:
- To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.