Removal [08/2023 - ]: Procedure

DISCONNECT NO. 1 FUEL VAPOR FEED HOSE

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

for PHEV Model

for HEV Model

DISCONNECT NO. 2 FUEL VAPOR FEED HOSE

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

for PHEV Model

for HEV Model

DISCONNECT ENGINE WIRE

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

for PHEV Model

for HEV Model

REMOVE NO. 1 EGR PIPE SUB-ASSEMBLY

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

for PHEV Model

for HEV Model

Using an 8 mm socket wrench, remove the 4 bolts and No. 1 EGR pipe sub-assembly from the intake manifold and EGR valve assembly.

REMOVE EGR VALVE ADAPTER GASKET

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE EGR INLET GASKET

DISCONNECT NO. 4 WATER BY-PASS HOSE

DISCONNECT NO. 8 WATER BY-PASS HOSE

REMOVE EGR VALVE ASSEMBLY

Using an 8 mm socket wrench, remove the 2 bolts and EGR valve assembly from the camshaft housing.