LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RC 350 Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission System (A760H) - Service Information (1 Of 2)) >> Speed Sensor >> Installation [09/2014 - ] >> Procedure

Installation [09/2014 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL TRANSMISSION REVOLUTION SENSOR (SP2) 
    1. Coat a new O-ring with ATF and install it to the transmission revolution sensor (SP2).
    2. Install the transmission revolution sensor (SP2) with the bolt.

      Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

    3. Connect the transmission revolution sensor (SP2) connector.
  2. INSTALL TRANSMISSION REVOLUTION SENSOR (NT) 
    1. Coat a new O-ring with ATF and install it to the transmission revolution sensor (NT).
    2. Install the transmission revolution sensor (NT) with the bolt.

      Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

    3. Connect the transmission revolution sensor (NT) connector.
scientia non olet · About LEMON Manuals