DTC B2450: Initialization has not been Performed [09/2014 - 10/2018]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Lexus RC 350, 2018 Lexus RC 300, 2017 Lexus RC 350, 2017 Lexus RC 300, and 2017 Lexus RC 200t. However, it is still accessible from the selected car via links, so may be relevant.

INITIALIZATION HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH

Perform initialization of the headlight light control ECU sub-assembly LH.

Refer to INITIALIZATION [09/2014 - 11/2017] , or refer to INITIALIZATION [11/2017 - 10/2018]

Result

Proceed to
NEXT

Result:

See step 2

CLEAR DTC

Clear the DTCs.

Refer to DTC CHECK / CLEAR [09/2014 - 10/2018]

Body Electrical > HL AutoLeveling > Clear DTCs

Result

Proceed to
NEXT

Result:

See step 3

CHECK FOR DTC

Turn the engine switch on (IG).

Check for DTCs.

Refer to DTC CHECK / CLEAR [09/2014 - 10/2018]

Body Electrical > HL AutoLeveling > Trouble Codes

DTC B2450 is not output.

HINT:

If the headlight light control ECU sub-assembly LH stores DTC B2450 even though the ECU has been initialized, there may be a malfunction in the headlight light control ECU sub-assembly LH.

Result

Proceed to
OK
NG

Result:

END (INITIALIZATION WAS NOT COMPLETED)

Result:

REPLACE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH. Refer to REMOVAL [09/2014 - 10/2018]