DTC P0771: Shift Solenoid "E" Performance (Shift Solenoid Valve SR) [09/2014 - 11/2017]: Procedure
- CHECK DTC OUTPUT
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Powertrain / ECT / Trouble Codes.
Powertrain > ECT > Trouble Codes
- Read the DTCs using the Techstream.
Result
Result Proceed to Only DTCs P0771, P0776 and P2714 are output A Only DTCs P0771, P0796 and P2714 are output B P0771, P0796, P2714, and other DTCs are output C HINT:
If any DTCs other than P0771, P0776, P0796 and P2714 are output, perform troubleshooting for those DTCs first.
Result:
A
GO TO DTC P0776 FLOWCHART. Refer to DTC P0776: Pressure Control Solenoid "B" Performance (Shift Solenoid Valve SL2) [09/2014 - 08/2016] , or refer to DTC P0776: Pressure Control Solenoid "B" Performance (Shift Solenoid Valve SL2) [08/2016 - 11/2017]
Result:
B
GO TO DTC P0796 FLOWCHART. Refer to DTC P0796: Pressure Control Solenoid "C" Performance (Shift Solenoid Valve SL3) [09/2014 - 10/2015] , or refer to DTC P0796: Pressure Control Solenoid "C" Performance (Shift Solenoid Valve SL3) [10/2015 - 08/2016] , or refer to DTC P0796: Pressure Control Solenoid "C" Performance (Shift Solenoid Valve SL3) [08/2016 - 11/2017]
Result:
C
GO TO DTC CHART. Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2014 - 10/2015] , or refer to DIAGNOSTIC TROUBLE CODE CHART [10/2015 - 08/2016] , or refer to DIAGNOSTIC TROUBLE CODE CHART [08/2016 - 11/2017]