DTC P0016-00: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor A [08/2016 - ]: Description

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus RC 300, 2023 Lexus RC 300, 2022 Lexus RC 300, 2021 Lexus RC 300, and 2020 Lexus RC 300. However, it is still accessible from the selected car via links, so may be relevant.

In the VVT (Variable Valve Timing) system, the appropriate intake valve open and close timing is controlled by the ECM. The ECM performs intake valve control by performing the following: 1) controlling the camshaft, cam timing oil control solenoid assembly, camshaft timing gear bolt (camshaft timing oil control valve assembly [for intake camshaft]) and operating the camshaft timing gear; and 2) changing the relative positions of the camshaft and crankshaft.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P0016-00	Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor A	Deviation in the crankshaft position sensor signal and camshaft position sensor (for intake camshaft) signal (2 trip detection logic).	Valve timing Cam timing oil control solenoid assembly Camshaft timing gear bolt (camshaft timing oil control valve assembly [for intake camshaft]) Camshaft timing gear assembly Oil control valve filter ECM	Comes on	DTC stored	SAE Code: P0016