Typical Malfunction Thresholds
WARNING: This page is about a different car, the 2017 Lexus RC 350, 2017 Lexus RC 300, 2016 Lexus RC 350, 2016 Lexus RC 300, and 2015 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
[OFF malfunction]
Both of the following conditions are met: OFF malfunction (A), and OFF malfunction (B) or (C)
OFF MALFUNCTION (A)
| Turbine speed/Output speed (NT/NO) | 0.65 or more, and 0.79 or less (This means actual gear is 5th) |
OFF MALFUNCTION (B)
| Turbine speed-Output speed x 5th gear ratio (NT-NO x 5th gear ratio) |
1000 rpm or more |
OFF MALFUNCTION (C)
| Turbine speed-Output speed x 6th gear ratio (NT-NO x 6th gear ratio) |
1000 rpm or more |
[ON malfunction]
Both of the following conditions are met: ON malfunction (A) and (B)
2 detections are necessary per driving cycle:
1st detection; temporary flag ON
2nd detection; pending fault code ON
ON MALFUNCTION (A)
| Turbine speed/Output speed (NT/NO) | 1.91 or more, and 2.50 or less (This means actual gear is 2nd) |
ON MALFUNCTION (B)
| Turbine speed/Output speed (NT/NO) | 0.65 or more, and 0.79 or less (This means actual gear is 5th) |