LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RC 350 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Engine Lubrication System (2GR-FSE) - Service Information) >> Oil Level Sensor >> Installation [09/2014 - 11/2017] >> Procedure

Installation [09/2014 - 11/2017]: Procedure

WARNING: This page is about a different car, the 2017 Lexus RC 350, 2017 Lexus RC 300, 2016 Lexus RC 350, 2016 Lexus RC 300, and 2015 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Install a new gasket to the engine oil level sensor.
    2. Install the engine oil level sensor with the 4 bolts.

      Torque: 7.0 N.m (71 kgf/cm, 62 in.lbf) 

      HINT: 

      Be sure to clean the contact surface.

    3. Connect the engine oil level sensor connector.
  2. ADD ENGINE OIL 

    See step  7 [09/2014 - 10/2015], or see step  7 [10/2015 - 11/2017]

  3. INSPECT ENGINE OIL LEVEL 

    Refer to PROCEDURE - Step 1

  4. INSPECT FOR ENGINE OIL LEAK 

    See step  8 [09/2014 - 10/2015], or see step  8 [10/2015 - 11/2017]

  5. INSTALL FRONT SUSPENSION MEMBER BRACE (for 2WD) 

    Refer to PROCEDURE - Step 113 [09/2014 - 10/2015] , or refer to PROCEDURE - Step 114 [10/2015 - 11/2017]

scientia non olet · About LEMON Manuals