On-Vehicle Inspection [10/2015 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus RC 300, 2023 Lexus RC 300, 2022 Lexus RC 300, 2021 Lexus RC 300, and 2020 Lexus RC 300. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK COOLING FAN MOTOR
- Disconnect the cooling fan motor connector.
- Check that the cooling fan motor operates smoothly when the battery is connected to the cooling fan motor connector.
*a Component without harness connected
(Cooling Fan Motor) - Measure the current while the cooling fan motor is operating.
Standard Current
Condition Specified Condition Battery voltage applied at 20°C (68°F) 15.0 to 21.0 A If the result is not as specified, replace the cooling fan motor.
- Connect the cooling fan motor connector.
- CHECK NO. 2 COOLING FAN MOTOR
- Disconnect the No. 2 cooling fan motor connector.
- Check that the No. 2 cooling fan motor operates smoothly when the battery is connected to the No. 2 cooling fan motor connector.
*a Component without harness connected
(No. 2 Cooling Fan Motor) - Measure the current while the No. 2 cooling fan motor is operating.
Standard Current
Condition Specified Condition Battery voltage applied at 20°C (68°F) 15.0 to 21.0 A If the result is not as specified, replace the No. 2 cooling fan motor.
- Connect the No. 2 cooling fan motor connector.