DTC B2450: Initialization has not been Performed [09/2014 - 10/2018]: Procedure
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Lexus RC 350, 2018 Lexus RC 300, 2017 Lexus RC 350, 2017 Lexus RC 300, and 2017 Lexus RC 200t. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM INITIALIZATION
- Perform initialization of the headlight leveling ECU assembly.
Refer to INITIALIZATION [09/2014 - 11/2017] , or refer to INITIALIZATION [11/2017 - 10/2018]
Result
Proceed to NEXT
Result:
NEXT
See step 2
- Perform initialization of the headlight leveling ECU assembly.
- RECHECK FOR DTC
- Using the Techstream, recheck for DTCs.
Refer to DTC CHECK / CLEAR [09/2014 - 10/2018]
Body Electrical > HL AutoLeveling > Trouble Codes
OK
DTC B2450 is not output.
HINT:
If the headlight leveling ECU assembly stores DTC B2450 even though the ECU has been initialized, the headlight leveling ECU assembly may be malfunctioning.
Result
Proceed to OK NG
Result:
OK
END
Result:
NG
REPLACE HEADLIGHT LEVELING ECU ASSEMBLY. Refer to REMOVAL [09/2014 - 10/2018]
- Using the Techstream, recheck for DTCs.