LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RC 350 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Lubrication System (8AR-FTS) - Service Information) >> Oil Pressure Switching Valve >> Removal [10/2015 - ] >> Procedure

Removal [10/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus RC 300, 2023 Lexus RC 300, 2022 Lexus RC 300, 2021 Lexus RC 300, and 2020 Lexus RC 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE TURBOCHARGER SUB-ASSEMBLY 

    Refer to REMOVAL [10/2015 - ]

  2. REMOVE WATER BY-PASS PIPE ASSEMBLY 

    Refer to PROCEDURE - Step 5

  3. REMOVE OIL PRESSURE SWITCHING VALVE ASSEMBLY 
    1. Remove the bolt and oil pressure switching valve assembly from the water inlet housing.
      GTY505314Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals