LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RC 350 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Lubrication System (8AR-FTS) - Service Information) >> Oil Level Sensor >> Installation [10/2015 - ] >> Procedure

Installation [10/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus RC 300, 2023 Lexus RC 300, 2022 Lexus RC 300, 2021 Lexus RC 300, and 2020 Lexus RC 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Install a new gasket to the engine oil level sensor.
    2. Install the engine oil level sensor with the 4 bolts.

      Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

      HINT: 

      Be sure to clean the contact surface.

    3. Connect the engine oil level sensor connector.
  2. ADD ENGINE OIL 

    See step  4 [10/2015 - 11/2019], or see step  4 [11/2019 - 11/2021], or see step  4 [11/2021 - ]

  3. CHECK ENGINE OIL LEVEL 

    See step  6 [10/2015 - 11/2019], or see step  6 [11/2019 - 11/2021], or see step  6 [11/2021 - ]

  4. INSPECT FOR ENGINE OIL LEAK 

    See step  5 [10/2015 - 11/2019], or see step  5 [11/2019 - 11/2021], or see step  5 [11/2021 - ]

  5. INSTALL FRONT SUSPENSION MEMBER BRACE 

    Refer to PROCEDURE - Step 77

scientia non olet · About LEMON Manuals