LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RC 350 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Lubrication System (8AR-FTS) - Service Information) >> Engine Oil Temperature Sensor >> Inspection [10/2015 - ] >> Procedure

Inspection [10/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus RC 300, 2023 Lexus RC 300, 2022 Lexus RC 300, 2021 Lexus RC 300, and 2020 Lexus RC 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT ENGINE OIL TEMPERATURE SENSOR 
    1. Measure the resistance according to the value(s) in the table below.
      GTY433289Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Engine Oil Temperature Sensor)

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 30°C (86°F) 2.647 to 3.021 kΩ
      NOTE:

      When checking the engine oil temperature sensor in water, be careful not to allow water to contact the terminals. After the check, wipe the water off the engine oil temperature sensor.

      If the result is not as specified, replace the engine oil temperature sensor.