Inspection [10/2015 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus RC 300, 2023 Lexus RC 300, 2022 Lexus RC 300, 2021 Lexus RC 300, and 2020 Lexus RC 300. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT DIRECT FUEL INJECTOR ASSEMBLY NOTE:
This inspection aims at checking the direct fuel injector assembly for an open or short. Because the direct fuel injector assembly of this vehicle is a high-pressure type, fuel injection volume cannot be checked.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 1.74 to 2.04 Ω If the result is not as specified, replace the direct fuel injector assembly.
*a Component without harness connected
(Direct Fuel Injector Assembly)
- Measure the resistance according to the value(s) in the table below.