Inspection [09/2014 - 11/2017]: Procedure
WARNING: This page is about a different car, the 2017 Lexus RC 350, 2017 Lexus RC 300, 2016 Lexus RC 350, 2016 Lexus RC 300, and 2015 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT FUEL INJECTOR ASSEMBLY NOTE:
This inspection aims at checking the fuel injector assembly for an open or short. Because the fuel injector assemblies of this vehicle are a high-pressure type, fuel injection volume cannot be checked.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 2.01 to 2.31 Ω If the result is not as specified, replace the fuel injector assembly.
*a Component without harness connected
(Fuel Injector Assembly)
- Measure the resistance according to the value(s) in the table below.