LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RC 350 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Control System (8AR-FTS) - Service Information) >> Camshaft Oil Control Solenoid >> On-Vehicle Inspection [10/2015 - ] >> Procedure

On-Vehicle Inspection [10/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus RC 300, 2023 Lexus RC 300, 2022 Lexus RC 300, 2021 Lexus RC 300, and 2020 Lexus RC 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY 
    1. Connect the Techstream to the DLC3.
    2. Start the engine.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Engine / Active Test / Control the Intake VVT OCV Duty Ratio Bank 1 / Data List / Intake VVT Change Angle Bank 1.

      Powertrain > Engine > Active Test 

      Active Test Display
      Control the Intake VVT OCV Duty Ratio Bank 1
      Data List Display
      Intake VVT Change Angle Bank 1
    5. Read the Data List while performing the Active Test with the engine idling.

      OK

      Techstream Operation Intake VVT Change Angle Bank 1
      -100% to 100% Varies by 70° FR or more