Installation [11/2017 - ]: Procedure

INSTALL PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)
1. Apply a light coat of engine oil to the O-ring.
2. Using a 22 mm deep socket wrench, install the PCV valve (ventilation valve sub-assembly) to the cylinder head cover sub-assembly.
  Torque: 5.0 N.m (51 kgf/cm, 44 in.lbf)
  
  NOTE:
  When reusing the PCV valve (ventilation valve sub-assembly), inspect the O-ring.
3. Connect the ventilation hose assembly to the PCV valve (ventilation valve sub-assembly) and slide the clip to secure it.
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 5
INSTALL INTAKE AIR SURGE TANK ASSEMBLY
Refer to INSTALLATION [11/2017 - ]