LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RC 350 Base, RWD >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Axle And Differential - Service Information (1 Of 2) >> FRONT DIFFERENTIAL CARRIER ASSEMBLY (for AWD) >> Removal [09/2014 - ] >> Procedure

Removal [09/2014 - ]: Procedure

  1. REMOVE FRONT FRAME ASSEMBLY 

    Refer to REMOVAL [09/2014 - 10/2015] , or refer to REMOVAL [10/2015 - 11/2017] , or refer to REMOVAL [11/2017 - ]

  2. REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY 
    NOTE:
    • Do not damage the installation surface when removing the front differential carrier assembly.
    • The remaining oil may leak out when removing the front differential carrier assembly.
    • Securely support the front differential carrier assembly while performing this step to avoid excessively tilting or dropping the front differential carrier assembly.
    • Remove the bolts with the front differential carrier assembly secured.
    1. Support the front differential carrier assembly with a jack.
      GTY466188Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      WARNING:

      The front differential carrier assembly is a heavy component. Make sure that it is supported securely.

    2. Remove the 3 bolts and front differential carrier assembly from the engine assembly.
scientia non olet · About LEMON Manuals