Installation [09/2014 - ]: Procedure

INSTALL REMOTE OPERATION CONTROLLER ASSEMBLY
1. Install the remote operation controller assembly with the 4 screws.
INSTALL CONSOLE PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 5 [09/2014 - 10/2018] , or refer to PROCEDURE - Step 5 [10/2018 - ]
INSTALL FRONT PANEL GARNISH RH
Refer to PROCEDURE - Step 8 [09/2014 - 10/2018] , or refer to PROCEDURE - Step 8 [10/2018 - ]
INSTALL FRONT PANEL GARNISH LH
Refer to PROCEDURE - Step 9 [09/2014 - 10/2018] , or refer to PROCEDURE - Step 9 [10/2018 - ]
INSTALL INSTRUMENT PANEL FINISH PANEL END RH
Refer to PROCEDURE - Step 10 [09/2014 - 10/2018] , or refer to PROCEDURE - Step 10 [10/2018 - ]
INSTALL INSTRUMENT PANEL FINISH PANEL END LH
Refer to PROCEDURE - Step 11 [09/2014 - 10/2018] , or refer to PROCEDURE - Step 11 [10/2018 - ]
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Refer to PROCEDURE - Step 12 [09/2014 - 10/2018] , or refer to PROCEDURE - Step 12 [10/2018 - ]