Caution / Notice / Hint

HINT: 

• Use the same procedure for the RH side and LH side.
• The following procedure is for the LH side.

COMPONENTS (REMOVAL) 

Fig 1: Wheel Opening Moulding (For Front Side) Removal Components

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Procedure		Part Name Code
1	FRONT FENDER MOULDING SUB-ASSEMBLY	75602A	See step  1	-	-
2	FENDER PANEL MUDGUARD SUB-ASSEMBLY	76902B	See step  2	-	-