LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> NX 450h+ Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge System - Diagnostic Codes & Circuit Tests >> Meter / Gauge System >> DTC B1507-18: Turn Signal Light Circuit Current Below Threshold [11/2021 - ] >> Description

DTC B1507-18: Turn Signal Light Circuit Current Below Threshold [11/2021 - ]: Description

This DTC is stored when the combination meter assembly detects an open in a front turn signal light circuit or rear turn signal light circuit.

HINT: 

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
B1507-18 Turn Signal Light Circuit Current Below Threshold Diagnosis Condition: 
  1. Auxiliary battery voltage is 10 V or more

Malfunction Status: 

  • Open in front turn signal light circuit
  • Open in rear turn signal light circuit
  • Headlight assembly*A
  • Rear combination light assembly*B
  • Harness or connector
  • Combination meter assembly
Combination Meter A
  1. *A: Refer to the following tables to identify headlight assembly component names.
    W/ AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM

    Component
    Headlight ECU sub-assembly
    Headlight unit assembly
    1. - Headlight turn signal LED unit*1
    Front turn signal light socket and wire*2
    Front turn signal light bulb*2

    *1: for LED Type Turn Signal Light

    *2: for Bulb Type Turn Signal Light

    W/O AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM

    Component
    Front turn signal light socket
    Front turn signal light bulb
  2. *B: Refer to the following tables to identify rear combination light assembly component names.
    Component
    Rear combination light socket and wire
    Rear combination light lens and body